Buzzrack Buzzybee 4 Bike Carrier

Buzzrack Buzzybee 4 Bike Carrier features:

• Assembly: Even though it is not assembled, BUZZYBEE 4 is very easy to put together: assemble the wheel support frame to the base using 8 screws, assemble the light support with 2 more screws, install the license plate, slide in the plastic wheel supports, fit the rack to the tow ball with no tools needed and you are ready to go!  
• Fitting to the car: When you first place the BUZZYBEE 4 on the tow ball it supports itself – you can let go of it and it won’t fall to the ground. You’ll then take the weight again, spin the tightening knob until it’s tight, and lock it. BUZZRACK‘s carriers comply with the very exacting standard XPR-18-904-4 and therefore include an anti-sway tensioner; this has an integrated handle and 2 or 3 turns are usually sufficient. The video below shows the fitting to the car and the installation of bikes.  
• Lighting system: The BUZZYBEE 4 comes with a 7 pin lighting system. 7 pin to 13 pin adapter is not included but can be purchased as an option.  
• Other features and specifications: Carrying bikes The wheel holders will accommodate most wheelbases, even small children’s bikes. You can reverse the wheel supports for the really small bikes. See technical data below The long wheel rubber-padded wheel straps hold tyres up to 3.25” wide; pull on them to tighten, and use the quick release to loosen The BUZZYBEE 4 is entirely suitable for carbon frame bikes; the rubber bike frame pads and high resistance straps hold any type of tube firmly but gently. The maximum permitted load is 60kg, with no bike weighing more than 20kg The down tube size is limited to 75mm diameter (3″); whatever bikes you have, always load the heaviest bikes nearest to the car Other features and basic specifications The patented conical fitting fits to all tow balls, even to the bolt-on tow balls we see occasionally that do not meet standards for neck length or ball diameter. A reminder that it locks to the tow ball. The BUZZYBEE 4 sits high on the tow ball, well clear of speed bumps and other hazards such as steep ferry ramps. The build quality – tube bending, welding, rust proofing, painting, component quality, is exemplary. The whole carrier looks and feels like the class act it is. All tools you might need are provided. All parts are replaceable if e.g. someone forgets that a tow bar carrier is fitted and reverses into a wall – which happens! The maximum permitted load you can carry is also determined by the tow bar nose weight; you will need to check you don’t exceed this before using any tow ball mounted bike carrier. Requires 65mm clearance from center of tow ball to rear of vehicle. Not suitable for trailers, campers, or RVs

Browse all our Bike Carriers – Click Here Link to Technical Information – Click Here

Who are Buzzrack?

From the creation in 2005, BUZZRACK has made its priority to bring consumers the safest racks at an affordable price, without forgetting the importance of a nice design and user friendly features. We are using the KINGRACK factory, well known in this industry for supplying famous brands of racks. The KINGRACK team has a long time expertise in manufacturing and the development of products. If you have a good bicycle, it probably comes from Taiwan. Why ? Because they have a very long experience in making the best bicycles in the world. Our factory is in Taiwan for the same reasons. The majority of the fabrication process is made in our factory. Our products are mainly made out of steel. The steel comes in under the shape of tubes, profiles, rolled or flat sheets. It is then given a different shape using presses and bending machine. Some of these newly made components will then be welded by robots. The final stage before assembly, the most important one to protect your product for a longer life is the coating process. For this we use powder coating. The principle of this process is to cover the entire outside surface of the part with a hard skin made of plastic. The piece of equipment required to perform this process is about 1/4 the size of our factory! By controlling the finish of our parts, we can be sure our products will last longer during their lifetime.