The Gear Aid Aquasure +FD Flexible Durable Repair Adhesive is a flexible and durable repair adhesive glue for waders, wetsuits, dry suits, kites, inflatables and more!
Gear Aid Aquasure +FD Flexible Durable Repair Adhesive features:
- Durable: Tough urethane repair adhesive bonds permanently to surfaces and dries clear
- Flexible: Cures to a stretchy rubber that bends with neoprene and other elastic gear
- Waterproof: Provides a water-tight seal that won’t peel or crack over time
- Abrasion Resistant: Keeps gear looking good by withstanding scrapes and scratches
- All-purpose: Bonds to all types of outdoor fabrics including: neoprene, rubber, nylon, canvas and vinyl
- Material: Thermoset urethane
- Colour: Clear
- Adheres To: neoprene, rubber, nylon, canvas, vinyl
- Cure Time: 8-12 hours (2 hours with cure accelerator)
- Application Temperature: 15° to 38°C (above 40% relative humidity)
- 28g
- Use Temperature: -30° to 82°C
- Storage: store in bag in freezer
Application Instructions:
Neoprene Repair
Clean damaged area with Cotol-240™ Cure Accelerator/Precleaner or solvent (paint thinner, nail polish remover or similar). Trim loose threads. Non-fabric surfaces should be roughened with sandpaper, then cleaned. Apply Aquasure to surfaces directly from tube or with knife or flat stick. Keep repair level overnight. Avoid contact with other surfaces. Most repairs reach full strength overnight (10–14 hours). Allow longer for thickest repairs. For fastest cure (2 hours or less), mix in Cotol-240.
Holes and Tears
Create backing with removable tape. Fill void and 1/4” beyond edge with Aquasure. Remove tape after full cure.
Seams
Apply 1/16” thick bead overlapping seams edges by at least 1/4”. Apply with slight pressure to saturate fabric surfaces.
High Wear Areas
Apply thin coat with knife for flexible abrasion resistance.
Care Instructions:
- Clean Up: To remove Aquasure from hands, buff with cloth soaked in paint thinner, nail polish remover or 99% isopropyl alcohol.
- Storage: Advance contents to tube neck. Wipe clean and cap. Keep in cool, dry place; for extended life, place in freezer. To thaw or for easier-flowing contents, soak tube in warm water for 15 minutes.
| Shop more Gear Aid products – Here |
| View our range of water sports accessories – Here |
If for any reason you are not satisfied with your purchase, please contact us by calling 071 9616660 or contact us, and we will provide you with further instructions on where returns should be shipped.
If you decide that you simply no longer want the item(s) purchased, you can return them to us for an exchange or refund.
All returns must reach us within 21 working days of receiving your order. This refund amount will exclude delivery charges.
Items to be returned or exchanged must be in their original packaging and labelling must still be attached. Your statutory rights are not affected.
